These Cylinders are not throw away type. Seals can easily be replaced when required after a long trouble-free life. They have corrosion resistant brass tubing, precision honed (16 Micro or better) with cross hatch lubricant retaining pattern. Front and Rear Aluminum Heads are precision machined and threaded into the tube. SMALL BORE CYLINDERS 1/2”, 3/4” & 1-1/8” BORE SIZES OPTIONS, DIMENSIONS & MOUNTS Pressure Rating: 150 P.S.I. Pneumatic or Hydraulic. Breakaway: Approximately 5-10 P.S.I.
BASIC CONSTRUCTION 1/2” & 3/4” BORES: Feature low friction U-Cups on the Duronze Piston, coupled with a 416 Stainless Rod. These Cylinders are available as standard in half-inch increments to 6” stroke. 1-1/8” BORE: Features an all-O-Ring construction. Aluminum Piston ground and polished 416 stainless steel rod. Cylinders are available as standard in half-inch increments to 6” and inch increments to 12” stroke. Special strokes available in all bore sizes. Up to 14” maximum on 1-1/8” bore and 10” maximum on 1/2” & 3/4” bores.
TYPE SM SINGLE ENDED An all purpose light duty pneumatic Cylinder designed for nose mounting with rear face porting. 1-1/8" Bore is also available in 300 Series Stainless Steel, TYPE SSSM. See catalog SS200.
TYPE SMD DOUBLE ENDED Similar to above except there is a single rod which protrudes from both ends and as one end retracts the other extends. 1-1/8" Bore is also available in 300 Series Stainless Steel, TYPE SSSMD. See catalog SS200.
TYPE SMT SINGLE ENDED Cylinder is designed for Clevis and various other universal mountings.
TYPE SP SINGLE ENDED Similar to Type "SM" except a square front head is used, thereby eliminating the need for a separate Foot Mount.
TYPE SPD DOUBLE ENDED Similar to Type "SMD" except a square front heads have been incorporated, eliminating the need for separate Foot Mounts.
APPROXIMATE SPRING FORCES IN POUNDS
Maximum stroke available on Spring Return Cylinders is 3” on 1/2” and 3/4” Bores and 6” on 1-1/8” Bore. ALL MOUNTS ORDERED SEPARATELY FROM THE FOLLOWING PAGE.
