SINGLE SOLENOID
MODEL VERR / VSESAT (AUTOMATIC RETURN)
This model incorporates a 4-way Single Solenoid Doubled
Bleed Pilot Valve. A momentary (NOT continuous)
electrical contact is required to move the piston its full stroke.
Upon reaching its FULL stroke, the piston will automatically
return to its original position.
This model is supplied with the piston normally retracted
(electrical contact will extend the piston)
The standard solenoid operator, is the AAS splice box housing.
Due to internal construction and application requirements,
there can be a loss of approximately 1/8" to 1/4" of stroke.
Voltages: 12,24,120 & 240/60 and 6,12 & 24VDC are
standard.

DOUBLE SOLENOID
MODEL SDS / VDST
This model incorporates a 4-way Double Solenoid Pressure
Pilot Valve. A momentary or maintained electrical contact
applied to one solenoid will move the piston its full stroke.
The piston will remain there under pressure until the other
solenoid is energized, which will cause the piston to
return to its original position. If a maintained contact is
employed, the first solenoid must be de-energized before
the other is energized.
The standard solenoid operator, as shown is the AAS
splice box housing.
Voltages: 12, 24,120 & 240/60 AC and 6, 12 & 24VDC are standard.

SINGLE PILOT
MODEL APSRR / VAPSRT
This model incorporates a 4-way Single Pressure Pilot Valve.
A continuous pilot pressure applied to "IN" side of valve
will move the piston its full stroke. When the pilot pressure
is released, the piston will return to its original position.
Pilot pressure is normally supplied through a 3-way N.C.
Valve. Model is supplied with the rod normally
retracted (pilot pressure to extend rod) pilot
pressure must be at least 75% of the operating
pressure.

SINGLE PILOT
MODEL VARR / VSAT (AUTOMATIC RETURN)
This model incorporates a 4-way Double Bleed Pilot Valve.
A momentary (NOT continuous) actuation of a Bleeder Valve
is required to move the piston Its full stroke. Upon reaching its
FULL stroke, the piston will automatically return to its original
position. This model is supplied with the rod normally
retracted (manual bleed to extend rod) Due to internal
construction and application requirements, there can be a loss
of approximately 1/8" to 1/4" of stroke. Bleeder Valve
Model BV100 is supplied on these models.

DOUBLE PILOT
MODEL AP / VAPT
This model incorporates a 4-way Double Pressure Pilot Valve.
A momentary or maintained pilot pressure applied to one
side of the valve will move the rod its full stroke.
The piston will remain in that position under pressure
until a pilot pressure is released and applied to the other side,
which will cause the piston to return to its original position.
If a maintained pilot pressure is applied, it must be released before
the other pilot pressure is applied. Pilot pressure must be
at least 25% of the operating pressure.

AUTOMATIC RECIPROCATING
MODEL VCR (NOT AVAILABLE WITH "SA" OPTION)
This model incorporates a 4-way Double Bleed Pilot Valve. By means of
Built-in Bleeder Valves and internal Cam Bosses.
This unit will automatically reciprocate as soon as air pressure is applied.
It is recommended that a shut-off valve be mounted in the inlet line. Due
to internal construction and application requirements, there can be a loss
of approximately 1/4" to 1/2" of stroke. Minimum stroke available is 1"

MANUALLY OPERATED
The following 2 models incorporate a 4-way Manual Valve.

MODEL VH / VHT
This model requires manual operation
of the lever to both extend
and retract the piston.

MODEL VHSRR / VHSRT:
This model is lever operated
to extend the normally retracted piston.The valve
is equipped with a built-in spring return which automatically
returns the rod when lever is released

*ADD SS TO THE PART No. FOR STAINLESS STEEL

EXAMPLE: SSA-232

MOUNTING NUTS Mounting Nuts are supplied with the Foot Mounts and are
included in the price of the Mounts. However, they may be purchased as a
separate item.

*ADD SS TO THE PART No. FOR STAINLESS STEEL

EXAMPLE: SSA-214